PEXGUY PEX-A Tubing
5/8″ x 500 ft PEX-A Red Tubing with Oxygen Barrier
Quality Radiant Heating PEX-A Tubing
PEXGUY PEX-A Tubing with Oxygen Barrier by PEX GUY can be used for radiant heating systems for both residential and commercial applications. NSF Certified to ASTM Standard ensure that it meet or exceeds USA quality standards. Manufactured to SDR-9 Dimension standards; this can be used with some of the most common PEX fitting systems; including the F1960 expander-style (Uponor/Wirsbo) fittings as well (see list below).
PEX-A is manufactured using the “Engel” method which results in the highest degree of crosslinking around 85 percent. Advantage of this method is the great flexibility, allowing the tightest bend radius to eliminate fittings and easier installation. PEX-A also offers a unique thermal and elastic memory which means kinks in the PEX can be repaired with the use of a heat gun. The higher degree of crosslinking of PEX-A also offers greater durability in freeze/thaw cycles, keeping the integrity of the pipe intact. This material is rated for direct burial and poured concrete installations.
Suitable for applications such as:
-
- Thick/Thin poured concrete slabs
- Underneath the sub-floor (between floor joist) with or without heat plates
- Engineered Floors / Modular Wood Engineered Floors
- Staple up and/or Staple down installations
- Baseboard or Radiator systems
- Snow Melting systems
- Solar Heating / Geothermal systems
- Water to Air Heat Exchanger systems
- Direct Burial Indoor/Outdoor Wood Boilers
- Compatible with: Uponor/Wirsbo Expander System, Crimp and Cinch Fittings systems, Push-Fit Fitting systems
Certifications and Ratings:
-
- NSF Certified for Radiant Heating (North America Certification)
- SDR 9 sizing standard
- Manufactured to meet/exceed ASTM 876/877 standards
- CSA 137.5 (Canadian Certification)
- DIN 4726 (European Standard)
- Pressure ratings: 79psi @ 200F, 100psi @ 180F, 160psi @ 73F by PPI
- 30 year industry standard warranty
- Footage marked every 5 feet on the tubing
- Box Weighs: 44 lbs
- Box Measures: 30 x 30 x 9 inches
- Color: RED
Compatible with:
-
- Expander Fitting Systems – F1960 (Uponor/Wirsbo)
- Compression Fitting Systems
- Crimp Fitting Systems
- Cinch/Pinch and Clamp Fitting Systems
- Sharkbite Fitting and other similar systems
- Press-Fit Fitting Systems
* Looking for different size or type of PEX piping? Check out the PEX piping section, or our other options for PEX-A tubing.
Reviews
There are no reviews yet.